• The Johnson Pump TA3P10-19 takes care of toilet waste. A rotary cutter shreds waste before it is pumped into or out from the holding tank. The pump should be connected as close as possible to the holding tank discharge outlet or bowl discharge outlet. Motor has built in thermal protection reducing the risk of damage when the pump is run dry • Pump Specs • Pump Body: Phenol Plastic • Impeller: Nitrile • Housing: Thermoplastic polyester • Shaft: Stainless Steel • Seal: Lip Seal • Hose connection: 1 1/2" hose or 1 1/2" NPT • Motor: 12 Volt DC • Capacity: 10 GPM at 6.7 ft(37 L/min at 0.2 bar) • Length: 9.06" 230mm • Width: 4.25" 108mm • Height: 3.23" 82mm • Max amp draw 15 amps • Fuse: 20 amp • CE marked according to following standards • ISO8846: Small Craft- Electrical devices protection against ignition or surroundingflammable gases • ISO10133: Small Craft- Electrical systems extra low voltage DC installations • EN55014 1993/radio disturbance This product comes with a 3 year warranty and overload protection. This is also a direst replacement for Jabsco and Shurflo.

E-mail a friend about this item.

Return to Catalog